Pharmaceutical metal detector free fall metal separator SAYP-600
Pharmaceutical metal detector free fall metal separator SAYP-600
This product requires a stable environment with a temperature range of -20°C to 60°C, humidity between 30% and 85% without condensation. Direct sunlight, heating appliances, vibration sources, dust, volatile flammables, corrosive gases, salt water, and strong electromagnetic fields should be avoided. The power supply voltage must remain within a ±10%/+15% fluctuation range.
Operate
The metal separator can be installed directly on top of the feed pipe of the equipment; the sensor faces up and the output pipe faces down.(feeding by gravity)
The hole in the mounting plate at the lower end of the metal separator should be consistent with the hole in the feed pipe, and then the mounting plate is fixed on the equipment.
The holes in the upper mounting plate of the metal separator should match the holes in the feed hopper and mixer so that this device can be directly mounted on the metal separator.
The cylinder requires 2.5-4.5 kg of compressed air to operate properly. In order to achieve the best working condition, the compressed air must first pass through the water separator and oiler.
Metal separator needs: single phase 220V/50-60Hz power supply.
Remark
- The power plug must be unplugged when cleaning.
- A cleaning tool such as a soft plastic brush or cloth should be used. Never use metal brushes, etc.
- Use neutral detergent for cleaning. Never use organic solvents such as thinner and benzene.
Comprehensive Solutions
Explore HiF Machine’s extensive lineup of pharmaceutical machinery and packaging solutions, tailored for maximum efficiency and value.