Fully Automatic Positioning Labeling Machine CED-202

Feature

• Wide applicability: suitable for round bottles and square bottles of 15-500ml, with a wide range of applications.
• High efficiency: The production capacity is 30-120 bottles/minute, and the labeling efficiency is high.
• Stable and reliable: Using well-known brand configurations, such as Delta servo motors, Schneider switching power supplies, etc., the system is stable and reliable.
• High degree of automation: It adopts touch screen human-machine interface, which is simple to operate and can automatically calculate the label length and gap.
• Convenient maintenance: Detailed troubleshooting instructions are provided to facilitate users to maintain and solve problems.
• Multifunctional: It has functions such as label position and gap adjustment, photoelectric eye position and sensitivity adjustment, etc. to adapt to different labeling needs.
• Easy to operate: A complete operation flow chart is provided to facilitate users to understand the entire operation process.
• Compact structure: small size, light weight, small footprint and compact structure.
  Simple maintenance: Maintenance precautions are provided to facilitate users to perform daily maintenance.
• High cost performance: complete functions, moderate price and high cost performance.

Remarks

•  Power supply and grounding: Make sure the equipment is reliably grounded to avoid the risk of electric shock.
• Start-stop interval: Make sure the start-stop interval is greater than 30 seconds to avoid damaging electrical components.
• Parameter adjustment: Do not change the parameters of the servo driver and inverter at will, so as not to affect the normal operation of the equipment.
• Fiber Optic Cables: Do not bend fiber optic cables during operation as this may result in labeling errors and the need for fiber replacement.
• Electrical connections: Do not change electrical lines, data lines and air pipe interfaces at will, and protect them from damage.
• Emergency Stop Switch: Before starting and labeling, make sure the “Emergency Stop” button under the touch screen is raised.
• Touch screen: Avoid scratching the touch screen surface to avoid affecting touch sensitivity.
• Cleaning and maintenance: Clean the main rubber wheel regularly and avoid using sharp objects to remove label paper.
• Conveyor belt: Keep the surface of the conveyor belt clean and use a brush if necessary.
• Drive belt: Check the drive belt of the main labeling motor every month. If it is too loose, adjust it appropriately. Be careful not to be too tight.
• Bearing inspection: Regularly check the bearings of each component to prevent loose screws from affecting operation